ATLAS OCAP 5-Device
Remote Control with Learning
Users Guide
PREPROGRAMMED FOR YOUR SET-TOP BOX
ownload from Www.Somanuals.com. All Manuals Search And Download
Setup Codes for DVR/PVR Systems . . . . . . . . . . . . . . . . . . . . 43
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setup Codes for TVs (DLP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setup Codes for TVs (HDTV) . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setup Codes for TVs (LCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setup Codes for TVs (Plasma) . . . . . . . . . . . . . . . . . . . . . . . . 54
Setup Codes for TV/DVD Combos . . . . . . . . . . . . . . . . . . . . . . 55
Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 57
Setup Codes for TV/VCR/DVD Combos . . . . . . . . . . . . . . . . . . 58
Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setup Codes for Video Accessories . . . . . . . . . . . . . . . . . . . . 64
ownload from Www.Somanuals.com3. All Manuals Search And Download
INTRODUCTION
The Atlas OCAP 5-Device Remote Control with Learning
by Universal Electronics is our latest generation
universal remote control. Its sophisticated technology
allows you to consolidate up to five of your original
home entertainment remote controls into one easy-to-
use product. Moreover, its packed with advanced
features such as:
•
•
•
Preprogrammed control to operate the cable
converter supplied by your cable service provider
Dedicated keys to control popular functions on your
DVR/PVR (Digital/Personal Video Recorder)
Programmable Master Power key for master on/off
control of your home entertainment equipment with
a single keystroke
•
•
•
•
•
•
Instant Tune-In keys for assignment to your favorite
channels
Channel Lock to lock channel selection only to the
cable converter
Volume Lock to lock volume controls to one mode or
individual modes
Device Key Re-Assignment to remotely control a
second (duplicate) device
Code Search to help program control of older or
discontinued components
Color-coded keys to quickly locate popular
functions
•
•
Code library for popular video and audio devices
Backlighting (not available on all remotes)
Before using the product, you will need to install the
enclosed batteries and also perform some programming
to operate the specific home entertainment devices you
wish to control.
Please follow the instructions detailed in this manual to
set up the unit and then start enjoying your new remote
control and cable service.
ownload from Www.Somanuals.com4. All Manuals Search And Download
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the Atlas
OCAP 5-Device Remote Control with Learning and then
study the Key Charts (on the next three pages) to learn
how they function.
To find out what type of devices can be controlled by
each device key after programming, see “Device Table”
on page 8 .
ownload from Www.Somanuals.com5. All Manuals Search And Download
Key Charts
Key
Function
Use SETUP for all programming
sequences. Also use to turn
backlighting on and off, if applicable.
Press PWR once to turn on or off a home
entertainment device. For MASTER
POWER control, see “Using the Master
Power Key” on page 22.
Press VCR, DVD, AUD, TV, or CBL once to
select a home entertainment device to
control. Also see “Device Table” on
page 8.
Each device key has an embedded LED
(red light) that blinks upon selection
and indicates the remote control is
working and (after programming) is
sending signals.
Use GUIDE to display the program
guide.
Press SETTINGS once to display available
interactive services.
Use INFO to display the current channel
and program information.
Use DAY+ (or DAY-) to move a day
forward (or back) on your cable
converter’s program guide.
Use the Cursor keys to move the cursor
in the program guide and menu screens
and to navigate within the interactive
service.
Use OK/SELECT to choose options, PPV
events, and to tune to programs from
the program guide.
Use PAGE+ (or PAGE-) to page up (or
page down) through menu screens and
the program guide.
Use EXIT to exit out of your cable
converters menu and guide.
Use A, B, C, or D to access additional
cable features (see your cable
converter’s manual).
ownload from Www.Somanuals.com6. All Manuals Search And Download
Key
Function
Use VOL+ (or VOL-) to raise (or lower)
the audio volume.
Use FAV to cycle through your favorite
channels stored in your cable converter.
Use CH+ (or CH-) to select the next
higher (or lower) channel.
For DVD players, use these keys to skip
forward (or reverse) through chapters.
For amplifiers/receivers, use these keys
to select the next higher (or lower)
preset station.
Press MUTE once to turn the sound off
or on.
Press LAST once to recall the last
channel.
Press ON DEMAND to access Video on
Demand services.
Reserved for use as Macro keys (see
“Programming Macro Keys” on
page 20).
Use
to command your PVR/DVR
cable box to instantly replay the last 7
seconds of a program you are watching.
Press LIST once to display a list of
recorded shows on your PVR/DVR cable
box.
Press LIVE to command your PVR/DVR
cable box to return to watching live TV.
In all modes except CBL, use REW, PLAY,
FFWD, STOP, and PAUSE to control a
VCR, DVD player, or a PVR (after
selecting a desired device). To record in
the VCR mode, press REC twice.
In the CBL mode, use these keys to
control the DVR/PVR functions of the
set-top box.
Use the keypad numbers (1-9, and 0) to
directly tune channels (e.g., 09).
For amplifiers/receivers, use the keypad
numbers to select inputs 1 through 10.
ownload from Www.Somanuals.com7. All Manuals Search And Download
Key
Function
P
ress ASPECT once to change the aspect
ratio of the show you are watching. (Not
available on all set-top boxes)
.
Press SHIFT to access additional cable
features (see your cable converter’s
manual).
Use PIP ON-OFF to switch the Picture-
In-Picture feature on or off (if available
on your TV or cable service).
Use PIP SWAP to switch images and
sound between the main and window
pictures (if available on your TV or
cable service).
U
se PIP MOVE to move the window picture
to different positions in the main picture
(if available on your TV or cable
service).
Use PIP CH+ (or CH-) to select the next
higher (or lower) PIP channel (if
available on your TV or cable service).
In the CBL mode, use VIDEO SOURCE to
view other video sources (A or B)
instead of cable.
In all TV mode, use VIDEO SOURCE to
watch TV or video/DVD programs on a
desired device.
For amplifiers/receivers, use VIDEO
SOURCE to select an input source.
Device Table
NOTE:
Please refer to the table below when
performing the instructions in
“Programming Device Control” on page 10 or
“Setting Up a Combo Unit” on page 11.
After programming, the Atlas OCAP 5-Device Remote
Control with Learning will be able to control the
following types of devices:
Device Key
Controls these types of devices
VCR, TV/VCR Combo, PVR (Personal
Video Recorder), or extra DVD Player
DVD Player, or extra VCR, TV/VCR
Combo or PVR
Audio Amplifier, Tuner, or Receiver
ownload from Www.Somanuals.com8. All Manuals Search And Download
Device Key
Controls these types of devices
Television
Cable Box (Converter) or Satellite
Receiver
INSTALLING BATTERIES
❶
❷
❸
1.
2.
On the back of the remote control, push the
tab and lift off the battery cover.
Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3.
4.
Align the covers keys with the cases holes and
press the cover back into place. The tab should
click when the cover is locked.
Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
NOTE:
When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.
ownload from Www.Somanuals.com9. All Manuals Search And Download
PROGRAMMING DEVICE CONTROL
The Atlas OCAP 5-Device Remote Control with Learning
is preprogrammed to operate the cable box (converter)
provided by your cable system, an RCA TV, a Toshiba
DVD player, an RCA VCR, and a Pioneer audio receiver.
To control devices other than the default brands,
perform the following steps; otherwise skip this section.
NOTES: For control of a Combo device (for example, a
TV/VCR combo), skip this section and per-
form the instructions on “Setting Up a Combo
Unit” on page 11. Also refer to “Device Table”
on page 8 to find out which devices can be
programmed onto each device key.
If you have another brand of cable converter
or a satellite receiver you would like to control,
you’ll need to unlock the cable ID Lock before
changing the converter code (see “Program-
ming Cable ID Lock” on page 20).
1.
Turn on a device and, if applicable, insert
video media, (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down
the codes and device you wish to program
before moving on to step 2.
2.
On the remote control, press a device key once
(i.e., VCR, DVD, AUD, TV, or CBL); it will blink
once. Then press and hold SETUP until the
selected mode key blinks twice.
3.
Use the “Manufacturer’s Codes” starting on
page 28) to locate the type of device and
brand name and then enter the first four-digit
code for your device. If performed correctly,
the selected mode key will blink twice.
NOTE:
If the selected mode key emits a long blink,
the entry is invalid. Repeat steps 2 through 3
and try entering the same code again.
4.
Aim the remote control at the device and
press PWR once. The device should turn off. If
it does not, repeat steps 2 through 3, trying
each code for your brand until you find one
that works. If it still does not respond, try
searching for the code (see “Searching for
Your Code” on page 13).
NOTE:
If the device does not have a PWR key, press
theꢀ(Play) key.
ownload from Www.Somanuals.co1m0. All Manuals Search And Download
5.
Repeat steps 1 through 4 for each device you
want the remote control to operate. For future
reference, write down each working device
code in the boxes on the following page.
VCR Code
Device Type:___________________
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
CBL Code
Device Type:___________________
TV Code
Device Type:___________________
SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/VCR Combo or a
TV/DVD Combo, you need to follow special steps to set
it up. Perform the following instructions to control
combo device:
1.
For a TV/VCR Combo, turn on your TV/VCR
Combo and insert a video cassette. (For a TV/
DVD Combo, insert a DVD).
2.
On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.
3.
Use the “Manufacturer’s Codes” starting on
page 28 to locate the brand name and enter
the first four-digit code for your combo device
ownload from Www.Somanuals.co1m1. All Manuals Search And Download
(for example, TV/VCR). If you perform this
procedure correctly, the VCR key will blink
twice.
NOTE:
If the VCR key did not blink twice after enter-
ing the codes last digit, repeat steps 2 through
3 and try entering the same code again.
If you’ve located a setup code that works for
your combo device (for example, a TV/VCR
Combo) and a separate TV code is also listed,
you’ll need to program this code into the
remote control to access volume control (see
“Programming Device Control” starting on
page 10).
4.
Aim the remote control at your combo device
(for example, TV/VCR Combo) and press
PWR once. The device should turn off. If it
does not respond, repeat steps 2 through 3,
trying each code listed for your brand until
you find one that works. If it still does not
respond, try searching for the code
(“Searching for Your Code” starting on
page 13).
5.
For future reference, write down each working
device code in the boxes below:
TV/VCR or TV/DVD Code
TV Code (if used)
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
the Atlas OCAP 5-Device Remote Control with Learning
after trying all of the codes listed for your brand, or if
your brand is not listed at all, try searching for your
code.
For example, to search for a code for your TV:
1.
2.
Turn on your TV.
On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.
ownload from Www.Somanuals.co1m2. All Manuals Search And Download
3.
Enter 9 9 1. The TV key will blink twice.
4.
5.
Aim the remote control at the TV and press
PWR once.
Press and release the CH+ key continuously,
then stop when the TV turns off.
NOTE:
In the search mode, the remote control will
send IR codes from its library to the selected
device, starting with the most popular code
first.
6.
Press PWR. The TV should turn on, then
press SETUP to lock in the code.
NOTE:
If the TV does not turn on during step 6, then
slowly press and release CH- to go back
through the codes, then press SETUP when the
TV turns on.
7.
To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (e.g., VCR, DVD, AUD, or CBL)
for the device you are searching for.
ownload from Www.Somanuals.co1m3. All Manuals Search And Download
CHECKING THE CODES
If you have set up the Atlas OCAP 5-Device Remote
Control with Learning by searching for your device code
(on the previous page), you may need to find out which
four-digit code is operating your equipment.
F
or example, to find out which code is operating your TV
:
1.
On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.
2.
Enter 9 9 0. The TV key will blink twice.
3.
To view the code for the first digit, press 1
once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 11.
NOTE:
If a code digit is 0, the selected mode key will
not blink.
4.
Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, and 4 for the fourth digit.
Finish writing down the code in the TV Code
boxes on page 11.
5.
To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g., VCR, DVD, AUD, or CBL) for the device
you are checking. Write down the codes in the
appropriate boxes on page 11.
USING LEARNING
The Atlas OCAP 5-Device Remote Control with Learning
includes a Learning feature so you can add functions
that are unique to your home entertainment devices
(e.g.,VCR Tracking Up or Down). However, there are some
considerations
.
Learning Precautions
•
•
•
Your original remote controls must be in working
order for learning to work properly.
Learned keys are mode-specific, so each one can
store a unique function for each mode.
Do not use the following keys for learning: Device
Keys, SETUP, Record (•), Tune-In Keys.
ownload from Www.Somanuals.co1m4. All Manuals Search And Download
•
•
Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
•
For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
NOTE:
Please have your original remote controls
handy before programming learning.
Programming a Learned Key
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
1.
Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 5.
NOTE:
If the LED displays one long flash instead,
either your batteries are low, or the Atlas
OCAP 5-Device Remote Control with Learn-
ing has a memory fault.
2.
Press a mode key once (i.e., VCR, DVD, AUD,
TV, or CBL) to assign a mode for learning.
3.
4.
Then press the key on your Atlas OCAP
Remote Control that learns the new code.
Place the Atlas OCAP 5-Device Remote
Control with Learning head-to-head (about 2"
apart) from your original remote control. Also
locate the key (on your original remote
control) that you want the Atlas OCAP 5-
Device Remote Control with Learning to
learn.
2"
5.
On the original remote, press and hold the key
to be learned. The Atlas OCAP 5-Device
Remote Control with Learning’s LED will
blink rapidly, then turn off. Continue holding
ownload from Www.Somanuals.co1m5. All Manuals Search And Download
the key on the original remote until the Atlas
OCAP 5-Device Remote Control with
Learning’s LED blinks twice.
NOTE:
If the LED displays one long blink, a learning
error has occurred. Try repeating this step
again until a successful capture occurs. If the
function is still not captured, press and hold
SETUP to exit programming and review the
“Learning Precautions” on the previous page.
If needed, also see “Troubleshooting” on
page 25. After review, start programming
again at step 1.
6.
Repeat steps 2 through 5 for another mode
and/or key or press and hold SETUP to exit
programming.
Deleting a Single Learning Key
his process returns the key to its original programmin
for the mode you select. You can also delete learned
T
g
programming by teaching a different function to the key
(see “Programming a Learned Key” on page 15)
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
1.
Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 6.
2.
Press a mode key once (i.e., VCR, DVD, AUD,
TV, or CBL).
3.
4.
Press the key containing the learned function
to be deleted twice. The remote will blink
twice.
Repeat steps 2 through 3 for another key or
press and hold SETUP to exit programming.
ownload from Www.Somanuals.co1m6. All Manuals Search And Download
Deleting All Learned Keys in a Specific Mode
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
1.
Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 5.
2.
3.
Press a mode key twice (i.e., VCR, DVD, AUD,
TV, or CBL) to clear all the learned keys for
that mode. The LED blinks twice.
Repeat step 2 for another mode or press and
hold SETUP to exit programming.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control
capabilities are locked to the cable converter. The
*
affected keys are 1 through 0, CH+, CH-, and LAST. This
will guarantee that you do not inadvertently change a
channel on your TV or VCR. However, you can de-
activate this feature to allow full access to these keys in
the TV and VCR modes.
*
NOTE: This feature does not affect the AUD mode.
Unlocking Channel Control
1.
2.
3.
On the remote control, press CBL once; it will
blink once. Press and hold SETUP until the
CBL key blinks twice.
Enter 9 7 3. The CBL key will blink twice.
Press CH- once. The CBL key will blink four
times.
Now the remote control will provide TV and VCR
channel-control capabilities while in the TV or VCR
mode.
ownload from Www.Somanuals.co1m7. All Manuals Search And Download
Locking Channel Control to CBL
1.
On the remote control, press CBL once; it will
blink once. Press and hold SETUP until the
CBL key blinks twice.
2.
Enter 9 7 3.The CBL key will blink twice.
3.
Press CH+ once. The CBL key will blink twice.
Now, regardless of what mode you select (except AUD),
the channel keys will only change channels on your cable
converter.
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Atlas
OCAP 5-Device Remote Control with Learning, Global
Volume Lock is set to TV, so you can control TV volume
while in the VCR, DVD, TV or CBL mode. You can perform
Individual Volume Unlock on a selected device to set its
volume control for independent operation.
NOTE:
The audio mode’s (AUD) volume controls are
active regardless of Volume Lock settings.
However, if you lock the volume controls to
the AUD mode, you will have control of the
audio device’s volume in all other modes (i.e.,
VCR, DVD, TV, and CBL). This can be an advan-
tage if, for example, you always listen to home
entertainment devices through your receiver’s
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1.
Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g., CBL) and press it once. Next,
press and hold SETUP until the device key
blinks twice.
2.
Enter 9 9 3. The last-selected device key will
blink twice.
ownload from Www.Somanuals.co1m8. All Manuals Search And Download
3.
4.
Press VOL- once. The last-selected device key
will blink four times.
Repeat steps 1 through 3 for each device you
want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., CBL), pressing VOL+, VOL-,or MUTE, will control
only that device’s volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE:
Performing these instructions will set inde-
pendent volume control for all programmed
devices.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 3. The last-selected device key will
blink twice.
3.
Press VOL+ once. The last-selected device key
will blink four times.
Locking Volume Control To One Mode (Global
Volume Lock)
NOTE:
The audio mode’s volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD
mode, you will control the audio device’s vol-
ume in all other modes (i.e., VCR, DVD, TV, or
CBL). This can be an advantage if, for exam-
ple, you always listen to home entertainment
devices through your receiver’s speakers.
1.
2.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
Enter 9 9 3. The last-selected device key will
blink twice.
3.
Select a mode (e.g., TV or AUD) which you
want to use to control the volume. The
selected device key will blink twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.
ownload from Www.Somanuals.co1m9. All Manuals Search And Download
PROGRAMMING CABLE ID LOCK
The Atlas OCAP 5-Device Remote Control with Learning
is locked at the factory to operate your cable provider’s
set top box. However, if you have another brand or
model of cable converter or satellite service that you
would like to control, then you’ll need to perform the
following steps to unlock the ID Lock, enter a new
manufacturer’s code, and lock the ID Lock again.
1.
2.
Turn on the cable converter.
On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice.
3.
4.
Enter 9 8 2. The CBL key will blink four
times, indicating ID Lock is unlocked.
Perform the instructions under
“Programming Device Control” on page 10 to
program device control for the desired cable
converter or satellite receiver.
When you are done, perform steps 5 and 6 on
this page to again lock the cable ID Lock.
5.
6.
On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice.
Enter 9 8 2. The CBL key will blink twice,
indicating ID Lock is again locked.
PROGRAMMING MACRO KEYS
The Atlas OCAP 5-Device Remote Control with Learning
includes two macro keys (located directly below the
MUTE and LAST keys). Macro keys allow you to set up key
macros to activate certain keys in a specific order. For
example, you can set up a key macro to change the
channels on your TV, raise or lower the volume, and
start recording on your VCR, all with the touch of one
key. If you want to change the macros stored in a
previously-programmed macro key, you’ll need to clear
the key first (see “Clearing a Macro Key” on page 21).
ownload from Www.Somanuals.co2m0. All Manuals Search And Download
Programming a Macro Key
1.
On the remote control, press and hold SETUP
until it blinks twice.
2.
Enter 9 9 5. The SETUP key blinks twice.
3.
4.
Select a macro key (for example, F1) and
press it once.
Press the key sequence you want to program
into the macro. For example, to turn on your
TV and raise its volume, press TV followed by
VOL+.
NOTE:
You can program up to 15 key presses into one
macro.
5.
Press and hold SETUP until it blinks twice.
6.
To add another macro, repeat steps 1 through
5, substituting the new key sequence to be
added in step 4.
NOTE:
Programming more than five macros on the
same macro key overwrites previous settings.
Clearing a Macro Key
1.
On the remote control, press and hold SETUP
until it blinks twice.
2.
Enter 9 9 5. The SETUP key blinks twice.
3.
4.
Press the macro key you want to clear once.
Press and hold SETUP until it blinks twice.
This macro key is now clear and ready for
reprogramming (see “Programming a Macro Key” on
page 21). If desired, repeat these to clear another Tune-
In key.
ownload from Www.Somanuals.co2m1. All Manuals Search And Download
USING THE MASTER POWER KEY
The Atlas OCAP 5-Device Remote Control with Learning
has a unique feature that allows you to sequentially turn
up to five of your home entertainment devices on or off
with a single key press.
NOTE:
MASTER POWER (PWR) only works in the CBL
mode. If it is not programmed, only the cable
converter will turn on or off. In any other
mode, pressing MASTER POWER (PWR) once
will turn the selected device on or off.
Programming the Master Power Key
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 5. The last-selected device key
blinks twice.
3.
4.
Press PWR once.
For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once. For the second device
in the power sequence, press its key once (e.g,
TV). Then press PWR.
5.
6.
Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
To save the settings and exit the program:
a.
b.
Press CBL once.
Press and hold SETUP until the CBL key blinks
twice.
ownload from Www.Somanuals.co2m2. All Manuals Search And Download
Using the Master Power Key
1.
After programming, point the remote control
at the devices. Press CBL once.
2.
Press PWR once to sequentially turn the
programmed home entertainment devices on
or off.
You will see the devices turn on or off according to the
programmed sequence.
Clearing the Master Power Key
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 5. The last-selected device key
blinks twice.
3.
4.
Press and release PWR.
Press and hold SETUP until the CBL key blinks
twice.
RE-ASSIGNING DEVICE KEYS
The Atlas OCAP 5-Device Remote Control with Learning
can be set up to control a second device of an already-
assigned type. For example, to have the unit control a
TV, a Cable Converter, and two audio devices (for
example, two audio receivers), re-assign the unused VCR
key to operate the second audio device as follows:
NOTE:
VCR is preset at the factory to control an RCA
VCR. Performing the steps below will over-
write those settings.
1.
On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.
2.
Enter 9 9 2. The VCR key will blink twice.
ownload from Www.Somanuals.co2m3. All Manuals Search And Download
3.
Press AUD once, then press VCR once. The VCR
key will blink twice.
The VCR key is now ready to be programmed for your
second audio device. See “Programming Device
Control” on page 10. To re-assign other device keys,
repeat these and substitute the key sequence using the
following chart:
NOTE:
Only one device can be assigned to an unused
device key at a time.
To Re-Assign
Perform Key Sequence
VCR as 2nd VCRbSETUPb9b9b2bAUDbVCR
AUD key
VCR as 2nd VCRbSETUPb9b9b2bTVbVCR
TV key
VCR as 2nd VCRbSETUPb9b9b2bCBLbVCR
CBL key
VCR back to VCRbSETUPb9b9b2bVCRbVCR
VCR
To re-assign another unused device key, substitute it for
the VCR key above and then perform the sequence. For
example, to re-assign an unused AUD key as a second
DVD key, perform
AUDbSETUPb9b9b2bDVDbAUD.
When a re-assignment is done, the selected device key
(e.g., AUD) will blink twice to confirm your choice. At
that time, you will need to program device control (see
“Programming Device Control” on page 10).
CLEARING CUSTOM PROGRAMMING
The Atlas OCAP 5-Device Remote Control with Learning
contains a Custom Programming Reset program. You can
use it to remove all custom programming, except your
setup codes and reassigned device keys.
IMPORTANT: Executing this program will erase all cus-
tom settings for Volume Lock, Learned Keys,
Tune-In Keys, and Channel Lock. However,
your device programming remains.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
ownload from Www.Somanuals.co2m4. All Manuals Search And Download
2.
Enter 9 8 0. The last-selected device key
blinks twice, pauses, and blinks twice again to
confirm that all custom programming is
cleared.
ACTIVATING BACKLIGHTING (OPTIONAL)
On some models of your Atlas OCAP 5-Device Remote
Control with Learning, you can activate backlighting.
Backlighting enables your remote’s keypad to remain lit
for five seconds after you press any key. To enable
backlighting on a remote with that feature, perform the
following step:
1.
Press SETUP twice within one second.
Backlighting is turned on.
To disable backlighting, perform the following step:
1.
Press SETUP twice within one second.
Backlighting is turned off.
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a
key.
SOLUTION: Replace the batteries with two (2) new AA
batteries (see “Installing Batteries” on page 9).
PROBLEM: Device key blinks when you press a key, but
home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control
at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home
entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand
being set up. Make sure all devices can be operated with
an infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some
combo units may require both a TV code and a VCR
code for full operation (see page 11).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing
Volume Lock” on page 18.
ownload from Www.Somanuals.co2m5. All Manuals Search And Download
PROBLEM: PLAY and STOP keys do not work on a
Motorola DCT-2000 cable converter.
SOLUTION: Re-program the CBL key for cable code 0476
(see “Programming Device Control” on page 10).
PROBLEM: Tried Search Method and still could not find
a working code.
SOLUTION: Try the Search Method again after clearing
out the device key as follows:
a. Press and hold SETUP until device key blinks twice.
b. Enter 9 9 2.
c. Press and release the device key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 0032. For Sharp, use
TV code 0093 and VCR code 0048.
FCC NOTICE
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
This equipment has been verified to comply with the
limits for a class B computing device, pursuant to FCC
Rules. In order to maintain compliance with FCC
regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or
unshielded cables is likely to result in interference to
ownload from Www.Somanuals.co2m6. All Manuals Search And Download
radio and TV reception. The user is cautioned that
changes and modifications made to the equipment
without the approval of manufacturer could void the
user’s authority to operate this equipment.
ADDITIONAL INFORMATION
This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to your Atlas OCAP 5-Device Remote
Control with Learning.
•
For help via the Internet, visit us at:
©Copyright 2006 by Universal Electronics Inc. No part of this
publication may be reproduced, transmitted, transcribed,
stored in any retrieval system, or translated to any language, in
any form or by any means, electronic, mechanical, magnetic,
optical, manual, or otherwise, without prior written
permission of Universal Electronics Inc.
M1056L
12/06
ownload from Www.Somanuals.co2m7. All Manuals Search And Download
MANUFACTURER’S CODES
Setup Codes for Audio Amplifiers
Adcom
0577, 1100
Bose
0674
Carver
0892
Durabrand
Elan
1561
0647
GE
0078
Harman/Kardon
JVC
0892
0331
Left Coast
Lenoxx
Luxman
Marantz
McIntosh
Nakamichi
NEC
0892
1561
0165
0892, 0321
0251
0321
0264
Optimus
Parasound
Philips
0395, 0823
0246
0892
Pioneer
Polk Audio
RCA
0823
0892
0823
Realistic
Sansui
0395
0321
Shure
0264
Sony
0689, 0815, 1126
0078, 0211
0331
Soundesign
Victor
Wards
0078, 0211
0354, 0133
Yamaha
Setup Codes for Audio Receivers
ADC
0531
Adcom
Aiwa
0616
1405, 0158, 0189, 0121,
0405, 1243, 1388, 1641
Akai
Alco
AMC
0076, 0224, 1255, 1512
1390
1077
ownload from Www.Somanuals.co2m8. All Manuals Search And Download
Amphion Media Works
AMW
1563, 1615
1563, 1615
1609, 1074
1257, 1430, 1774
1120, 1189
1189
Anam
Apex Digital
Arcam
Audiotronic
Audiovox
B & K
1390, 1627
0701, 0820, 0840
0702
BK
Bose
1229, 0639, 1253, 1629,
1841, 1933
Brix
1602
Cambridge Soundworks 1370
Capetronic
Carver
0531
1189, 0189, 0008, 0042,
0360, ,0121, 1289
Casio
0195
Clarinette
Classic
0195
1352
Coby
1263, 1389
1136
Compaq
Criterion
Curtis Mathes
Daewoo
Dell
1420
0080
1250
1383
Delphi
1414
Denon
1360, 0004, 0273, 0771,
1142, 0121
Emerson
0424
Fisher
0042, 0219, 0360, 1801
0424, 0463
1517, 1567
1263
Garrard
Gateway
Glory Horse
Go Video
Harman/Kardon
1532
0110, 0189, 0891, 1289,
1304, 1306
Hewlett Packard
Hitachi
1181
1273, 1801
1426
Initial
Inkel
0062
Integra
0135, 1298, 1320
ownload from Www.Somanuals.co2m9. All Manuals Search And Download
JBL
JVC
0110, 1306
0074, 1263, 1374, 1495,
1811, 1871
Kenwood
1313, 1570, 1569, 0027,
0042, 0077, 0186, 0239,
0313
KLH
1390, 1412, 1428
Koss
0424, 1366, 1497
1798
Lasonic
Lenoxx
Lexicon
LG
1437
1076
1293
Linn
0189
Liquid Video
Lloyd's
LXI
1497
0195
0181
Magnavox
1189, 1269, 0189, 0128,
0195, 0391, 0531, 1514
Marantz
1189, 1269, 0039, 0189,
0128, 1289
McIntosh
MCS
1289
0039, 0346
Micromega
Mitsubishi
Modulaire
Myryad
NAD
1189
1393
0195
1189
0320
Nakamichi
NEC
0097, 0347, 1313, 1555
0235
1389
1389
Norcent
Nova
Onkyo
0135, 0380, 0842, 1298,
1320, 1531
Optimus
1023, 0042, 0080, 0177,
0181, 0186, 0219, 0531,
0670, 0738, 0801, 1074
Oritron
1366, 1497
Panasonic
1308, 1518, 0039, 0309,
0367, 0518, 1288, 1316,
1548, 1633, 1763, 1764
Penney
Philips
0195
1189, 1269, 0189, 0391,
1120, 1266
ownload from Www.Somanuals.co3m0. All Manuals Search And Download
Pioneer
1023, 0014, 0080, 0150,
0244, 0531, 0630, 1384
0801
Polaroid
Polk Audio
Proscan
Quasar
1508
0189, 1289, 1414
1254
0039
1263
RadioShack
RCA
1023, 1609, 1254, 0054,
0080, 0346, 0360, 0530,
0531, 1074, 1154, 1390,
1511
Realistic
Regent
Rio
0163, 0181, 0195
1437
1383, 1869
Saba
1519
Samsung
Sansui
Sanyo
1295, 1500, 1304
0189, 0193, 0346, 1189
0219, 0801, 1251, 1469,
1801
Scott
0163, 0322
0186, 1286
1263, 1556
Sharp
Sharper Image
Sherwood
0062, 0491, 0502, 1077,
1423, 1517, 1567, 1653,
1905
Shinsonic
Sirius
1426
|